2018 - 2021
CAP-TBC
Mold temperature control and optimum parameterization of the process play a key role in the production of high-quality injection molded components. Inadequate temperature control of the mold walls can often result in surface defects such as gloss differences or weld line notches during the injection molding of molded parts. However, the use of dynamic temperature control techniques to minimize surface defects leads to significantly lower cost effectiveness, due to the additional energy added and the resulting longer cooling phase. The use of thermal barrier coatings slightly slows down the cooling process of the mold filling compound and thus makes extremely efficient use of the heat introduced into the plastic during the melting process. This makes it possible to increase the energy efficiency of the injection molding process without compromising part quality. Due to their low thermal conductivity and adapted coefficients of thermal expansion, oxide ceramic materials such as zirconia are the ideal materials for passive insulation layers. Within the scope of this project, innovative thermal insulation coatings and coating processes for injection molds are to be developed in an international project consortium. Significant improvements are to be made with regard to the achievable growth rates of the coatings
(>500 nm/h) as well as a reduction of the necessary layer thicknesses (<30 μm).
For this purpose, the application of functional coatings by metal organic chemical vapor deposition (MOCVD) is to be combined with plasma activation of the precursors. In this way, the advantages of conformal MOCVD layer formation with increased reactivity at low process temperatures, shorter process times and optimized porosity are to be achieved. With the envisaged development goals, effective process control and reproducible application of the coatings would be feasible for an industrial environment.
More information:
Kunststoffinstitut Lüdenscheid
Project leader
Prof. Dr. Achim von Keudell
Experimental Physics II
Ruhr-Universität Bochum
Universitätsstraße 150
NB 5/125, 44801 Bochum
2018-2023
Plasma-based process control of reactive sputtering processes
Reactive sputtering processes in low-temperature plasmas are used for the deposition of thin films as the basis for many high-tech products. Despite this enormous social importance, fundamental mechanisms such as electron heating, plasma surface interactions and transport phenomena in these plasmas are not understood. Consequently, the non-linear and non-local influences of global parameters such as neutral gas pressure, gas flows, power, magnetic fields, etc. on the properties of the deposited thin films are not understood. This leads to massive limitations in process optimization and control. Lack of understanding and access to the actual layer-determining distribution functions of different species at the surfaces as well as the properties of these interfaces, existing process controls are based on the control of secondary variables such as gas flows and powers, which do not clearly determine the layer properties, as well as greybox models.
Thus, sputtering processes are representative for a multitude of plasma processes where similar problems exist. In this project, a plasma-based process control of reactive sputtering processes for the deposition of Al2O3 layers in a capacitive radio frequency (RF) magnetron, i.e. based on plasma sizes and scientific understanding, will be developed and tested for the first time. The first goal is to develop a fundamental understanding of the effect of global control variables on layer-determining distribution functions, surface and layer properties. For this purpose, a synergistic combination of experimental and theoretical methods will be used by characterizing the discharge numerically by a variety of plasma and surface diagnostics experimentally as well as by kinetic simulations. Based on this fundamental understanding, plasma quantities suitable for process control are to be determined, which can be measured non-invasively within seconds during the process and clearly correlate with the layer-determining distribution functions and surface properties.
These quantities are to be described by fast reduced global models, which make predictions about the causes and compensation measures of unwanted process drifts. The measured plasma quantities and models will then be used in a parallel developed control loop for process control, based on which a significantly improved control of thin film properties will be demonstrated. The aim is to make plasma properties such as the energy per incorporated particle adjustable in order to correlate the layer properties with the plasma properties and thus to be able to control layer properties. If successful, this concept of plasma-based process control can be transferred to other processes. In addition, important fundamental insights into the plasma physics of such discharges are expected.
The project is funding by the German Research Foundation (2018-2023). Project leaders are Prof. Brinkmann, Dr. habil. Julian Schulze, and Prof. Lunze from Ruhr-University Bochum.
2016 - 2024
Carbon2Chem
The BMBF project consists of 17 partners from industry and science with the goal to reduce the emission of carbon dioxide.
In detail, the use of gases from metallurgical plants are used for the production of chemicals, so that the emission of carbon dioxide is sustainably reduced. The requested hydrogen for this process is produced with the help of renewable enegry sources. The aim of CO2 reduction in the Ruhr area as well as at other metallurgical plants should be used in an economical way.
The project started at June 1st, 2016 and lasts until May 30th, 2024.
Further information
Spokesperson for Ruhr-Universität Bochum
Prof. Dr. Martin Muhler
Industrial Redox Catalysis
Ruhr-Universität Bochum
Universitätsstraße 150
44801 Bochum
Tel.: +49 (0) 234 - 32 28754
Fax: +49 (0) 234 - 32 14115
2015 - 2018
Astrophysical Processes in the Heliospheric Environment
The BMBF promoted project "Astrophysical Processes in the Heliospheric Environment" is coordinated by the Ruhr-Universität Bochum. Project partners are Rheinische Friedrich-Wilhelms-Universität Bonn, Christian-Albrechts-Universität zu Kiel, Julius-Maximilians-Universität Würzburg as well as the Max-Planck-Institut für Sonnensystemforschung in Göttingen.
The transit time is from April 1st, 2015 up to March 31st, 2018.
Abstract: To enhance the understanding of the heliosphere and her surrounding as astrophysical system, the project includes the development, expansion, and refinement of theory and modelling of turbular (inter)stellar plasmas and the transport of energetic partlices in it.
Contact
PD Dr. Horst Fichtner
Ruhr-Universität Bochum
Theoretical Physics IV - Heliophysics
Universitätsstr. 150
NB 7/26, 44801Bochum
2014 - 2018
Project Pluto+
The network project PluTO+ aims to increase the quality and yield of optical deposition technologies started in Octobre 2014. It has an overall volume of 9.5 billion Euro. The BMBF supports the project within the support programme "Photonik Forschung Deutschland". Project coordinator is Bühler Alzenau GmbH, more information can be found here.
Contact
Prof. Dr. Ralf Peter Brinkmann
Chair for Theoretical Electrical Engineering
Ruhr-Universität Bochum
Universitätsstr. 150
ID 1/127, 44801 Bochum